Hi Sven,
dann ist die Abdichtung zwischen Pumpenrad und Gehäuse undicht. Evtl gibt sich das wieder, aber wahrscheinlich eher nicht. Dann ist eine neue Pumpe fällig.
Ich würd sie erstmal drinlassen und beobachten ob das wieder aufhört.
mfG
Harry
Für neue Pumpen hier noch ein Tip aus einem Mosskatalog für TR5/6:
"Water Pump Leaks
New water pumps can at times leak when first installed, the leak being discoverd prior to the startup. This can be a fustrating experience, particulary if you proceed to remove the new pump in order to send it back to your supplier for exchange!
The usual cause of a leaking pump is due to the carbon race water pump seal not fully seating against the back face of the impellor. Since the hard carbon sits against cast iron or brass impellor with only light spring pressure, it shouldn't be difficult to believe this to be the source of the leak. The best way to insure that the carbon race is properly seated, is to actually spin the pump prior to installation....
... The coolant acts as a lubricant and actually inhibits this important seal break-in procedure."